manufacturer category series package voltage class rev . date ecliptek corp. oscillator emcl12 plastic 2.5v os7p 11/09 emcl12 series oscillator emcl12 electrical specifications 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. h 0.85 l 7.0 w 5.0 1.000mhz to 220.000mhz 0c to +70c, -20c to +70c, or -40c to +85c -55c to +125c 2.5v dc 0.125v dc 75ma maximum 100ppm, 50ppm, 25ppm, or 20ppm maximum 1.55v dc typical, v cc -1.025v dc minimum 0.80v dc typical, v cc -1.62v dc maximum 150psec typical, 300psec maximum 50 5(%) 50 ohms into v cc -2.0v dc output enable (oe) and complementary output, or standby and (st) complementary output enables outputs enables outputs disables outputs: high impedance 70ma maximum (oe) 30a maximum (st) 1ppm maximum 10 mseconds maximum 0.2psec typical 2.0psec typical 1.5psec typical, 3.0psec maximum 20psec typical, 25psec maximum 1.7psec typical 1.6psec typical 1.6psec typical 1.4psec typical 1.0psec typical 0.7psec typical 1.1psec typical 0.5psec typical 0.4psec typical nominal frequency (mhz) operating temperature range storage temperature range supply voltage (v cc ) input current frequency tolerance / stability output voltage logic high (v oh ) output voltage logic low (v ol ) rise time / fall time duty cycle load drive capability logic control / additional output output control input voltage output enable current standby current aging start up time period jitter rms phase jitter (random) fj=637khz to 10mhz rms phase jitter (random) fj=1mhz to 20mhz rms phase jitter (random) fj=1.875mhz to 20mhz excluding load termination current inclusive of all conditions: calibration tolerance at 25c, fre- quency stability over the operating temperature range, supply voltage change, output load change, 1st year aging at 25c, reflow, shock, and vibration 20% to 80% of waveform at 50% of waveform v ih of 70% of v cc minimum no connection v il of 30% of v cc maximum without load without load first year at 25c deterministic random rms pk-pk 1.000mhz to 100.000mhz 100.001mhz to 156.250mhz 156.251mhz to 220.000mhz 1.000mhz to 100.000mhz 100.001mhz to 156.250mhz 156.251mhz to 220.000mhz 1.000mhz to 100.000mhz 100.001mhz to 156.250mhz 156.251mhz to 220.000mhz ? mems clock oscillators ? lvpecl output ? +2.5v supply voltage ? complementary output ? output enable and standby options ? 6 pad plastic smd package ? 30,000 g shock resistance ? rohs compliant (pb-free)
manufacturer category series package voltage class rev . date ecliptek corp. oscillator emcl12 plastic 2.5v os7p 11/09 mechanical dimensions all dimensions in millimeters environmental/mechanical specifications marking specifications tape and reel dimensions all dimensions in millimeters 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. emcl12 c 2 h - 155.520m tr part numbering guide available options blank=bulk tr=tape & reel frequency logic control/additional output h=output enable (oe) and complementary output j=standby (st) and complementary output duty cycle 2=50 5(%) frequency tolerance & stability/ operating temperature range c=100ppm maximum over 0c to +70c d=50ppm maximum over 0c to +70c e=25ppm maximum over 0c to +70c f=20ppm maximum over 0c to +70c g=100ppm maximum over -40c to +85c h=50ppm maximum over -40c to +85c j=25ppm maximum over -40c to +85c l=100ppm maximum over -20c to +70c m=50ppm maximum over -20c to +70c n=25ppm maximum over -20c to +70c a b c d e f 16.3-.1 7.5.1 6.75.1 4 .1 2.1 f g h j k l 8.1 b0* 1.5 +.1-0 a0* .3 .05 k0* tape m n o p q 1.5 min 50 min 20.2 min 13.2 40 min r s t u v qty/reel 2.5 min 10 min 22.4 max 360 max 16.4+2-0 1,000 reel *compliant to eia 481a tolerances= +0.1 pin 1: output enable (oe) or standby (st) pin 2: no connect pin 3: case ground pad 4: output pad 5: complementary output pad 6: supply volttage 3 2 1 a 4 5 6 7.00 0.15 2.30 1.47 1.20 0.10 (x4) 5.00 0.15 0.85 0.15 0.08 max 1.40 0.10 (x4) note a: center paddle is connected internally to oscillator ground (pad 3). 5.08 0.10 2.60 0.15 2.54 typ suggested solder pad layout all dimensions in millimeters characteristic specification esd susceptibility mil-std-883, method 3015, class 2, hbm: 2000v flammability ul94-v0 mechanical shock mil-std-883, method 2002, condition g, 30,000g moisture resistance mil-std-883, method 1004 moisture sensitivity level j-std-020, msl 1 resistance to soldering heat mil-std-202, method 210, condition k resistance to solvents mil-std-202, method 215 solderability mil-std-883, method 2003 (six i/o pads on bottom of package only) temperature cycling mil-std-883, method 1010, condition b thermal shock mil-std-883, method 1011, condition b vibration mil-std-883, method 2007, condition a, 20g line 1: xxxx ecliptek manufacturing lot code
|
